Upgrade from 5.x to 6.0
- 1 Introduction
- 2 New Installation
- 3 In-place Upgrade
- 4 Potential issues
- 5 External links
Proxmox Mail Gateway 6.x is based on a new major version of Debian. Carefully plan the upgrade, make and verify backups before beginning, and test extensively. Depending on the existing configuration, several manual steps — including some downtime — may be required.
Note: A valid and tested backup is always needed before starting the upgrade process. Test the backup beforehand in a test lab setup.
In case the system is customized and/or uses additional packages or any other third party repositories/packages, ensure those packages are also upgraded to and compatible with Debian Buster.
In general, there are two ways to upgrade a Proxmox Mail Gateway 5.x system to Proxmox Mail Gateway 6.x:
- A new installation (and restoring the configuration and database from the backup)
- An in-place upgrade via apt (step-by-step)
In both cases emptying the browser cache and reloading the GUI page is required after the upgrade.
- Install Proxmox Mail Gateway in one of the following three ways:
- Restore the backup you have made before the upgrade.
- Change the IP address and the hostname.
- For clustered setups:
- setup the slaves again
- then join them to the upgraded master-node (recreate the cluster).
- Upgrade to the latest version of Proxmox Mail Gateway 5.2.
apt update apt dist-upgrade
- Make a valid and tested backup of Proxmox Mail Gateway, either create and download it from the Webinterface, or do so on the CLI:
- At least 1GB free disk space at root mount point.
- Check known upgrade issues
In-place upgrades are done with apt. Familiarity with apt is required to proceed with this upgrade mechanism.
Please ensure first that your Mail Gateway 5 system is up-to-date before starting the upgrade process.
Update the configured APT repositories
Change the apt sources to Buster - see Package Repositories
sed -i 's/stretch/buster/g' /etc/apt/sources.list
Make sure to also edit all files in
/etc/apt/sources.list.d/ accordingly. For a Installation from the ISO
with the enterprise repository the following command will work:
echo "deb https://enterprise.proxmox.com/debian/pmg buster pmg-enterprise" > /etc/apt/sources.list.d/pmg-enterprise.list
Stop and Mask Services Before Upgrade
This is necessary to prevent changes to the database before and during the upgrade.
- Stop postfix and all Proxmox Mail Gateway services (emails will be queued by the servers trying to contact the Proxmox Mail Gateway)
systemctl stop postfix pmg-smtp-filter pmgpolicy pmgdaemon pmgproxy pmgmirror pmgtunnel
- Mask postfix and all Proxmox Mailgateway services to prevent them from starting during the upgrade
systemctl mask postfix pmg-smtp-filter pmgpolicy pmgdaemon pmgproxy pmgmirror pmgtunnel
- If you have a cluster, stop and mask all cluster-daemons on all nodes before you start the upgrade of the first node.
systemctl stop pmgmirror pmgtunnel systemctl mask pmgmirror pmgtunnel
- Then proceed by upgrading all nodes sequentially.
- The mail gateway service is provided by the other nodes, currently not being upgraded.
Upgrade The System
apt update apt dist-upgrade
It is not necessary to reboot yet.
Upgrade postgres Database
- Before you upgrade the postgres main cluster, you need to remove the automatically created cluster in the new version.
pg_dropcluster --stop 11 main
- Upgrade the postgres main cluster from 9.6 to 11 by using
- If possible, use the default setting of dumping the old databases and restoring them to avoid problems.
pg_upgradecluster -v 11 9.6 main
- If you want to do an in-place upgrade (using
pg_restore), you need to
REINDEXall databases due to an incompatibility in glibc:
- Unmask postfix and all non-cluster Proxmox Mail Gateway services to enable them again.
systemctl unmask postfix pmg-smtp-filter pmgpolicy pmgdaemon pmgproxy
- Reboot and control the journal to ensure that everything runs correctly.
- Remove the old postgres version and its data:
apt purge postgresql-9.6 postgresql-client-9.6 postgresql-contrib-9.6
After the Proxmox Mail Gateway upgrade
After upgrading, unmask and start all cluster-daemons on all nodes. This applies to upgrades of a single node as well as to upgrades of all nodes in a clustered setup:
systemctl unmask pmgmirror pmgtunnel systemctl start pmgmirror pmgtunnel
As a Debian based Distribution, Proxmox Mail Gateway is affected by most issues and changes affecting Debian. So ensure to read the Upgrade specific issues for buster
Postgres And Other Template Modifications
If you've modified the configuration template for postgresql (
/var/lib/pmg/templates/postgresql.conf), make sure to compare and update your copy in
Also compare all other templates you've overriden for new changes through the packages.
Service Failure Caused By Apparmor Featureset Missmatch
Debian Buster installs apparmor, if you still have the Debian stock kernel installed (
linux-image-4.19.0-5-amd64 recommends apparmor), due to a mismatch between the apparmor featureset in the stock kernel and the pve-kernel (which Proxmox Mailgateway uses) certain important services (e.g.
clamav) do not start. Currently you can mitigate the issue in two ways:
- preferred: uninstall
apt remove apparmor
- disable feature-pinning in apparmor by commenting out or deleting the line
If you've modified
/etc/logrotate.d/rsyslog make sure to compare the file upon upgrade - the
postrotate script changed. Without the new script logrotation does not work which also breaks the tracking center. The
postrotate script needs to be: